swHwȃ}CNGWjAOU
vHw

pu_

2013

E107.
Daisuke Kono, "Vibration analysis of machine tools considering contact stiffness of supports," 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013), Taipei, Taiwan, Nov. 2013.
Abstract

E106.
Yuu Nagai, Soichi Ibaraki, Shizuo Nishikawa, "Error calibration of 5-axis machine tools by on-machine measurement system using a laser displacement sensor," The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Matsushima, Miyagi, pp. 313-318, Nov. 2013.
Abstract

E105.
Keisuke Tsuboi, Soichi Ibaraki, "Estimation of Machine Tool Volumetric Error based on the Multi-lateration Principle using Machine Tool Rotary Axes - Two-dimensional case -," The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Matsushima, Miyagi, pp. 308-312, Nov. 2013.
Abstract

E104.
Soichi Ibaraki, Goh Sato, "'Open-loop' Tracking Interferometer for Three-dimensional Volumetric Error Measurement for Machine Tools," The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Matsushima, Miyagi, pp. 302-307, Nov. 2013.
Abstract

E103.
Yusuke Koike, Atsushi Matsubara and Iwao Yamaji, "Optimization of Cutting Path for Minimizing Workpiece Displacement at the Cutting Point: Changing the Material," 1st CIRP Conference on BioManufacturing (CIRP-BioM 2013), The University of Tokyo, Mar. 2013.
Abstract

2012

E102.
Soichi Ibaraki, Cefu Hong, "Thermal Test for Error Maps of Rotary Axes by R-Test," Key Engineering Materials (14th International Conference on Precision Engineering (ICPE2012)), vol.523-524, pp. 809-814, 2012.
Abstract

E101.
Ryota Sawamura, Shinya Ikenaga, Atsushi Matsubara, "Development of Dynamic Loading Device for Rotating Spindle of Machine Tools," Key Engineering Materials (14th International Conference on Precision Engineering (ICPE2012)), vol.523-524, pp. 554-549, 2012.
Abstract

E100.
Daisuke Kono, Takahiro Inagaki, Atsushi Matsubara, Iwao Yamaji, "Measurement of Contact Stiffness for Stiffness Estimation of Machine Tool Supports," Key Engineering Materials (14th International Conference on Precision Engineering (ICPE2012)), vol.523-524, pp. 457-462, 2012.
Abstract

E99.
Soichi Ibaraki, Cefu Hong, "Non-contact R-test for error calibaration of five-axis machine tools," ASME/ISCIE 2012 International Symposium on Flexible Automation (ISFA 2012), St. Louis, USA, June 2012.
Finalist for Best Paper Award (Theory) at ISFA 2012.
Abstract

E98.
Kotaro Nagaoka, Atsushi Matsubara, "Improving motion accuracy of tool center point using model-reference feedforward," Proc. of 5th CIRP Conference on High Performance Cutting 2012 (CIRP HPC 2012), Zurich, Switzerland, June 2012.
Abstract

2011

E97.
Daisuke Kono, Sho Nakade, Atsushi Matsubara, "Evaluation of surface roughness in high speed shaping of Ni-P," Proc. of 4th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN11), Hong Kong, P. R. China, Nov. 2011.
Abstract

E96.
Cefu Hong, Soichi Ibaraki, "Non-contact R-test for Dynamic Measurement on Five-axis Machine Tools," Proc. of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Omiya, Japan, Nov. 2011.
Winner of Young Researcher Award at LEM21.
Abstract

E95.
Soichi Ibaraki, Cefu Hong, Chiaki Oyama, "Construction of an error map of rotary axes by static R-test," Proc. of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Omiya, Japan, Nov. 2011.
Abstract

E94.
Yoshihiro Kimura, Atsushi Matsubara, Yusuke Koike, "Analysis of Measurement Errors of a Diffuse-Reflection Type Laser Displacement Sensor for Profile Measurement," Proc. of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Omiya, Japan, Nov. 2011.
Abstract

E93.
Kotaro Nagaoka, Atsushi Matsubara, Daisuke Kono, "Feedforward Control Method for Precise Motion Trajectory of Tool Center Point Based on Dynamic Model of NC Machine Tools," Proc. of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Omiya, Japan, Nov. 2011.
Abstract

E92.
T. Fujita, A. Matsubara, "Analysis and Compensation of Friction Force in Highprecision Linear Drive System," Proc. of 11th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen11), Como, Italy, May. 2011.

2010

E91.
Kotaro Nagaoka, Atsushi Matsubara, "Compensation of motion error for NC machine tools based on error analysis of tool tip motion -- Controller design fro error compensation using reference model --," Proc. of the 4th International Conference on Positioning Technology (ICPT2010), Busan, Korea, pp. 158-159, Nov. 2010.

E90.
Tomoya Fujita, Atsushi Matsubara, "Disturbance Force Analysis in High Precision Positioning System," Proc. of ICMT2010), Osaka University, Japan, pp. 270-273, Nov. 2010.
Abstract | PDF

E89.
Kunitaka Takeuchi, Soichi Ibaraki, Tomoaki Yano, Toshiyuki Takatsuji, Sonko Osawa, Osamu Sato, "Estimation of Three-dimensional Volumetric Errors of Numerically Controlled Machine Tools by a Laser Tracker," Proc. of 14th International Conference on Mechatronics Technology (ICMT2010), Osaka University, Japan, pp. 323-327, Nov. 2010.
Abstract | PDF

E88.
Yusuke Koike, Atsushi Matsubara, Shinji Nishiwaki, Kazuhiro Izui, Iwao Yamaji, "Optimization Design of Cutting Path for Minimizing Workpiece Displacement at Cutting Point," Proc. of CIRP HPC 2010, Gifu, Japan, Oct. 2010.
Abstract | PDF

E87.
Soichi Ibaraki, Takeyuki Iritani, Tetsuya Matsushita, "Error Calibration on Five-axis Machine Tools by on-themachine Measurement of Artifacts using a Touch-trigger Probe," Proc. of CIRP HPC 2010, Gifu, Japan, Oct. 2010.
Abstract | PDF

E86.
Chiaki Oyama, Soichi Ibaraki, Hisashi Otsubo, "Measurement and compensation of motion errors on 5-axis machine tool by R-test," Proc. of 4th CIRP International Conference on High Performance Cutting (CIRP HPC 2010), Gifu, Japan, Oct. 2010.
Abstract | PDF

E85.
Daisuke Kono, Atsushi Matsubara, "Investigation of copying rate of tool motions on workpiece profile," Proc. of International Conference on Precision Engineering (ICoPE2010 & 13th ICPE), Singapore, July 2010.
Abstract | PDF

E84.
Kotaro Nagaoka, Atsushi Matsubara, Cefu Hong, "Contour error compensation for NC machine tools based on synchronized measurement of tool-tip motion and error analysis," Proc. of ISFA2010, The University of Tokyo, July 2010.
Abstract | PDF

E83.
Tomoya Fujita, Atsushi Matsubara, Cefu Hong, Kazuo Yamazaki, "Influence of friction on high-precision positioning control," Proc. of ISFA2010, The University of Tokyo, July 2010.
Abstract | PDF

E82.
Yusuke Tanizawa, Soichi Ibaraki, Atsushi Matsubara, "Vision-based Measurement of Two-Dimensional Position Errors of a Machine Tool," Proc. of 2010 International Symposium on Flexible Automation (ISFA2010), The University of Tokyo, July 2010.
Abstract | PDF

E81.
Yusuke Koike, Atsushi Matsubara, Shinji Nishiwaki, Kazuhiro Izui, Iwao Yamaji, "Algorithm to Optimize Cutting Path for Minimizing Workpiece Displacement at Cutting Point," Proc. of 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), Kyoto, Japan, June 2010.
Abstract | PDF

E80.
Cefu Hong, Soichi Ibaraki, Atsushi Matsubara, "Experimental Study of the Influence of Position-dependent Geometric Errors of Rotary Axes on a Machining Test of Cone Frustum by Five-axis Machine Tools, Proc. of 2007 JSPE Kansai Division Annual Meeting, Kyoto University, June 2010.
PDF

2009

E79.
Yusuke Koike, Atsushi Matsubara, Yosuke Nakatsukasa, Iwao Yamaji, "Improving Tool Life in End Milling of Cobalt Chromium Molybdenum (Co-Cr-Mo) Alloy," Proc. of LEM21, Osaka University, Japan, pp. 653-656, Nov. 2009.
Abstract | PDF

E78.
Kotaro Nagaoka, Atsushi Matsubara, Cefu Hong, Atsushi Iizuka, Tomonori Sato, "Analysis and Compensation of Contour Error by Using Reference Model of Feed Drive for NC Machine Tools," Proc. of LEM21, Osaka University, Japan, pp. 161-166, Nov. 2009.
Abstract | PDF

E77.
Taku Yamazaki, Atsushi Matsubara, Tomoya Fujita, Yusuke Koike, Toshiyuki Muraki, Kohei Asano, Kazuyuki Kawashima, "Measurement of Spindle Stiffness by using a Magnet Loader," Proc. of The 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Osaka University, Japan, pp. 67-72, Nov. 2009.
Abstract | PDF

E76.
Soichi Ibaraki, Takafumi Hata, Tomoaki Yano, Toshiyuki Takatsuji, Sonko Osawa, Osamu Sato, "Estimation of Three-dimensional Volumetric Errors of Machine Tools by a Laser Tracker," Proc. of ASPEN09, Kitakyushu, Japan, Nov. 2009.
Abstract | PDF

E75.
Cefu Hong, Soichi Ibaraki, Atsushi Matsubara, "Influence of Component Errors of Rotary Axes on a Machining Test of Cone Frustum by Five-axis Machine Tools," Proc. of ASPEN09, Kitakyushu, Japan, Nov. 2009.
Abstract | PDF

E74.
Daisuke Kono, Atsushi Matsubara, Yusuke Koike and Iwao Yamaji, "Evaluation of Identification Accuracy of Copying Rate of Tool Motions with Measurement-Fused Machining System," Proc. of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN09), Kitakyushu, Japan, Nov. 2009.
Abstract | PDF

E73.
T. Fujita, A. Matsubara, "Compensation methods of relative position errors between tool tip and workpiece by using high response fine motion mechanism," Proc. of European Society for Precision Engineering and Nanotechnology (euspen09), San Sebastian, Spain, June 2009.
Abstract | PDF

2008

E72.
Kotaro Nagaoka, Atsushi Matsubara, Tomoya Fujita, Tomonori Sato, "Measurement and Analysis of Motion Accuracy Using NC system with Synchronized Acquisition of External Sensor Data," Proc. of ICPT2008, Hamamatsu, pp. 187-192, Nov. 2008.
PDF

E71.
Tomoya Fujita, Atsushi Matsubara, "Tool-workpiece full-closed loop control by using nano-positioner," Proc. of the 3rd International Conference on Positioning Technology 2008 (ICPT2008), Hamamatsu, pp. 141-142, Nov. 2008.
PDF

E70.
Taku Yamazaki, Atsushi Matsubara, Tomoya Fujita, Toshiyuki Muraki, "Measurement of Spindle Stiffness by using a Magnet Loader," Proc. of International Conference on Machine Automation (ICMA2008), Awaji, Sep. 2008.
Abstract | PDF

E69.
D. Kono, T. Fujita, A. Matsubara, I. Yamaji, "Machine Tools with an Enhanced Ball Screw Drive in Vertical Axis for Shaping of Micro Textures," Proc. of European Society for Precision Engineering and Nanotechnology (euspen08), Zurich, Switzerland, May 2008.
Abstract | PDF

E68.
Atsushi Matsubara, Tomoya Fujita, Iwao Yamaji, Soichi Ibaraki, "Measurement of Spindle Stiffness for the Monitoring System of Cutting Forces," Proc. of ISFA08, Atlanta, USA, June 2008.
Abstract | PDF

E67.
Yoshiaki Kakino, Soichi Ibaraki, Iwao Yamaji, Keiji Ogawa, Hidehito Ota, "Measurement of Motion Accuracies of Five-axis Machine Tools by using the Double Ball Bar Method DBB5," Proc. of ISFA08, Atlanta, USA, June 2008.
Abstract | PDF

E66.
Soichi Ibaraki, Takafumi Hata, Atsushi Matsubara, "A New Formulation of Laser Step Diagonal Measurement to Identify Three-dimensional Volumetric Errors," Proc. of 2008 International Symposium on Flexible Automation (ISFA08), Atlanta, USA, June 2008.
Abstract | PDF

2007

E65.
Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Tomoya Fujita, "High-precision machining by measurement and compensation of motion error," Proc. of the 4th LEM21, Fukuoka, pp. 809-812, Nov. 2007.
Abstract | PDF

E64.
Tomoya Fujita, Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Soichi Ibaraki, "Dynamic characteristics and positioning performance of piezoactuator-integrate ball screw drive," Proc. of the 4th LEM21, Fukuoka, pp. 507-510, Nov. 2007.
Abstract | PDF

E63.
Soichi Ibaraki, Takuya Shimizu, Atsushi Matsubara, "A Long-term Control Scheme of Cutting Forces to Regulate Tool Life in End Milling Processes," Proc. of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Fukuoka, pp. 143-148, Nov. 2007.
Abstract | PDF

E62.
M. Sharif Uddin, S. Ibaraki, A. Matsubara, T. Matsushita, "Prediction of Machining Accuracy of 5-Axis Machine Tools with Kinematic Errors," Proc. of MATADOR 2007, Taipei, Taiwan, pp. 285-288, July 2007.
Abstract | PDF

E61.
M. S. Uddin, A. Matsubara, S. Ibaraki, T. Yasuda, "Comparison of Cutting Strategies for High Productive End Milling," Proc. of MATADOR 2007, Taipei, Taiwan, pp. 191-194, July 2007.
Abstract | PDF

E60.
A. Matsubara, T. Fujita, D. Kono, N. Tanaka and Y. Watanabe, "Nano Positioning Drive with Piezoelectric Actuator Integrated into Support Bearing Unit of Ball Screw," Proc. of the 35th International MATADOR Conference (MATADOR 2007), Taipei, Taiwan, pp. 323-326, July 2007.
Abstract | PDF

2006

E59.
Daisuke Kono, Atsushi Matsubara, Soichi Ibaraki, Hisao Otsubo, Masaru Tsuboi, Isao Oshita, "Development and Evaluation of a High-Precision Machining Center with Friction-Less Drives," Proc. of 11th International Conference on Precision Engineering (ICPE), Tokyo, Japan, August 2006.

E58.
Soichi Ibaraki, Wataru Goto, Atsushi Matsubara, "Issues in Laser Step Diagonal Measurement and Their Remedies," Proc. of ISFA06, Osaka, Japan, pp. 26-29, July 2006.

E57.
Ahmed A. D. Sarhan, Atsushi Matsubara, Tomohiro Yasuda, "Development of a Cutting Force Monitoring System for Intelligent Machining," Proc. of ISFA06, Osaka, Japan, July 2006.

E56.
M. Sharif Uddin, Soichi Ibaraki, Atsushi Matsubara, Susumu Nishida, Yoshiaki Kakino, "A Tool Path Modification Approach to Cutting Engagement Regulation for the Improvement of Machining Accuracy in 2.5d End Milling," Proc. of ISFA06, Osaka, Japan, pp. 230-233, July 2006.

E55.
M. Mori, M. Fujishima, S. Ibaraki, K. Kashihara, "Performance Enhancement of Integrated Machine Tool Through Use of Direct Motor," Proc. of 2006 International Symposium on Flexible Automation (ISFA06), Osaka, Japan, pp. 53-56, July 2006.

2005

E54.
Mohammad Sharif Uddin, Soichi Ibaraki, Atsushi Matsubara, Susumu Nishida, Yoshiaki Kakino, "Constant Engagement Tool Path Generation to Enhance Machining Accuracy in End Milling," Proc. of LEM21, Nagoya, Japan, Oct. 2005.

E53.
Atsushi Matsubara, Motoyuki Sugihara, Ahmed A. D. Sarhan, Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Research on Spindle and Machining Process Monitoring for Intelligent Machine Tools," Proc. of the 3rd International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Nagoya, Japan, Oct. 2005.

2004

E52.
Masanori Murozumi, Hidenori Saraie, Yoshiaki Kakino, Soichi Ibaraki, "An Intelligent Process Control System for End Milling Processes," Proc. of the 7th ICPMT, Suzhou, P. R. China, December 2004.
Abstract

E51.
Susumu Nishida, Yoshiaki Kakino, Katsuzo Sudo, Hirotoshi Ohtsuka, Iwao Yamaji, Soichi Ibaraki, "An Constant Cutting Force Control for Finishing Process of Die and Mold by Using a Ball End Mill," Proc. of the 7th International Conference on Progress of Machining Technology (ICPMT), Suzhou, P. R. China, December 2004.
Abstract | PDF

E50.
Hirotoshi Ohtsuka, Yoshiaki Kakino, Iwao Yamaji, Atsushi Matsubara, Soichi Ibaraki, Heisaburo Nakagawa, Susumu Nishida, "Intelligent CAM System for Manufacturing of Die/Mold," Proc. of JUSFA04, Denver, CO, July 2004.
Abstract | PDF

E49.
Ahmed A. D. Sarhan, Atsushi Matsubara, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring of Cutting Force using Spindle Displacement Sensor," Proc. of JUSFA04, Denver, CO, July 2004.
Abstract | PDF

E48.
Susumu Nishida, Hirotoshi Ohtsuka, Iwao Yamaji, Yoshiaki Kakino, Soichi Ibaraki, Atsushi Matsubara, "The Improvement of Productivity and Quality of Die/Mold by Constant Feedrate Control at the Cutting Point," Proc. of JUSFA04, Denver, CO, July 2004.
PDF

E47.
Toshihiro Okuda, Soichi Ibaraki, Yoishiaki Kakino, Masao Nakagawa, Tetsuya Matsushita, "Disturbance Estimation on a Hexapod-type Parallel Kinematic Machine Tool by Using a Disturbance Observer," Proc. of JUSFA04, Denver, CO, July 2004.
Abstract | PDF

E46.
Soichi Ibaraki, Daisaku Ikeda, Iwao Yamaji, Atsushi Matsubara, Yoishiaki Kakino, Susumu Nishida, "Constant Engagement Tool Path Generation for Two-dimensional End Milling," Proc. of 2004 Japan-USA Symposium on Flexible Automation (JUSFA04), Denver, CO, July 2004.
Abstract | PDF

E45.
Soichi Ibaraki, Takeshi Yokawa, Yoishiaki Kakino, Masao Nakagawa, Tetsuya Matsushita, "Kinematic Calibration on a Parallel Kinematic Machine Tool of the Stewart Platform by Circular Tests," Proc. of the 2004 American Control Conference (ACC04), Boston, MA, June 2004.
Abstract | PDF

E44.
Kangkyu Lee, Atsushi Matsubara, Soichi Ibaraki and Yoshiaki Kakino, "Vibration Control of Feed Drive Systems by Nonlinear Relative Velocity Feedback," Proc. of the 1st International Conference on Positioning Technology (ICPT04), Hamamatsu, Japan, pp. 24-25, June 2004.
PDF

2003

E43.
Soichi Ibaraki, Iwao Yamaji, Yoshiaki Kakino, Daisuke Inoue, Susumu Nishida, "Tool path planning using trochoid cycles for hardened steel in die and mold manufacturing (1st report) -- Tool path generation for trochoid cycles based on Voronoi diagram --," Proc. of ICAM03, Beijing, P. R. China, pp. 435-442, Dec. 2003.
Abstract | PDF

E42.
Iwao Yamaji, Soichi Ibaraki, Yoshiaki Kakino, Susumu Nishida, "Tool path planning using trochoid cycles for hardened steel in die and mold manufacturing (2nd report) -- Tool path planning to avoid an excessive tool load --," Proc. of ICAM03, Beijing, P. R. China, pp. 443-450, Dec. 2003.
Abstract | PDF

E41.
Toshiyuki Muraki, Toshihito Okuda, Yoshiaki Kakino, "The Cost Effectiveness of the Machining of Box/Cylindrical Parts by a Multi-task Machine Tool," Proc. of the International Conference on Agile Manufacturing (ICAM03), Beijing, P. R. China, pp. 463-470, Dec. 2003.
Abstract | PDF

E40.
Masao Nakagawa, Tetsuya Matsushita, Tomoharu Ando, Yoshiaki Kakino, Soichi Ibaraki, Hiroya Takaoka, "Compensation of Gravity-induced Errors on Hexapod-type Parallel Mechanism Machine Tools," Proc. of LEM21, Niigata, Japan, pp. 619-624, Nov. 2003.
Abstract | PDF

E39.
Hidenori Saraie, Masahiro Sakahira, Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, Makoto Fujishima, "Monitoring and Adaptive Control of Cutting Forces Based on Spindle Motor and Servo Motor Currents in Machining Centers," Proc. of LEM21, Niigata, Japan, pp. 555-560, Nov. 2003.
Abstract | PDF

E38.
Matsubara, A., Lee, K., Ibaraki S., Kakino, Y., "Enhancement of Feed Drive Dynamics of NC Machine Tools by Actively Controlled Sliding Guideway," Proc. of LEM21, Niigata, Japan, pp. 535-540, Nov. 2003.
Abstract | PDF

E37.
Suzuki, Y., Matsubara, A., Kakino, Y., Tsutsui, K., "A Stick Motion Compensation System with a Dynamic Model," Proc. of LEM21, Niigata, Japan, pp. 525-528, Nov. 2003.
Abstract | PDF

E36.
Toshiyuki Muraki, Toshihito Okuda, Yoshiaki Kakino, "High productive Machining of Box/Cylindrical Parts by a Multi-task Machine Tool," Proc. of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Niigata, Japan, pp. 507-512, Nov. 2003.
Abstract | PDF

E35.
Kangkyu Lee, Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, Yasuhiko Suzuki, Satoru Arai, J Braasch, "A Servo Parameter Tuning Method for High-speed NC Machine Tools based on Contouring Error Measurement," Laser Metrology and Machine Performance VI, WIT Press, Southampton, UK, 2002 (Proc. of LAMDAMAP 03 at Huddersfield, UK, July 2003).
Abstract | PDF

2002

E34.
Ying Tang, Wei L. Wang, Yoshiaki Kakino, Iwao Yamaji, Tomonori Sato, Hirotoshi Ohtsuka, "Optimization of Slot End-Milling Process by Fixed Cycle Analysis for Die/Mold Machining," Proc. of the 4th JSME Manufacturing and Machine Tools Division Annual Meeting, Inuyama, Japan, Nov. 2002.
Abstract | PDF

E33.
Wei L. Wang, Ying Tang, Yoshiaki Kakino, Iwao Yamaji, Tomonori Sato, Hirotoshi Ohtsuka, "Optimization of Slot End-Milling Process by Fixed Cycle Analysis for Die/Mold Machining," Proc. of the 6th Int'l Conf. on Mechatronics Technology, Kitakyushu, Japan, pp. 213-217, Sept. 2002.
Abstract | PDF

E32.
Soichi Ibaraki, Masahiro Sakahira, Atsushi Matsubara, and Yoshiaki Kakino, "Simulation and Control of Cutting Forces in 2-1/2 Dimensional End Milling Processes," Progress of Machining Technology (Proc. of 6th Int'l Conf. on Progress of Machining Technology (ICPMT)), Xian, P. R. China, pp. 727-732, Sept. 2002.
Abstract | PDF

E31.
Iwao Yamaji, Yoshiaki Kakino, Soichi Ibaraki, Hidetoshi Otsuka, Hidenori Saraie, and Heizaburo Nakagawa, "Influence of Die Geometry on Tool Life in Endmilling of Hardened Steel," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 122-127, Sept. 2002.
Abstract | PDF

E30.
Minoru Hamamura, Jun Fujita, Yoshiaki Kakino, and Atsushi Matsubara, "A Study on Contouring Error at the Turning Point in CNC Machine Tools with Linear Encoder Feedback," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 632-637, Sept. 2002.
Abstract

E29.
Yoshinori Yamaoka and Yoshiaki Kakino, "High Productive Direct Tapping by Intelligent Machine Tools," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 530-535, Sept. 2002.
Abstract

E28.
Toshiyuki Muraki, Toshihito Okuda, and Yoshiaki Kakino, "High Productive Machining of Cubic-Cylinder Parts by Multi-Task Machine," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 498-502, Sept. 2002.
Abstract

E27.
Makoto Fujishima, Yoshiaki Kakino, Yoshinori Yamaoka, and So Fukui, "High Productive and Safety Drilling of Hard-to-cut Materials by Intelligent MachineTools -- Prevention of Tool Breakage and Extension of Tool Life by Adaptive Pecking in Machining Processes of Difficult-to-Machine Materials --," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 456-461, Sept. 2002.
Abstract

E26.
Heisaburo Nakagawa, Toshiki Hirogaki, Yoshiaki Kakino, and Iwao Yamaji, "Study on Tool Life in End Milling of Hardened Steel," Progress of Machining Technology (Proc. of 6th ICPMT), pp. 81-86, Sept. 2002.
Abstract

E25.
Soichi Ibaraki, Takashi Ogawa, Atsushi Matsubara, and Yoshiaki Kakino, "Model-based Learning Control of Cutting Forces in End Milling Processes," Proc. of 2002 Japan-USA Symposium on Flexible Automation (JUSFA), Hiroshima, Japan, vol. 1, pg. 401-408, July 2002.
Abstract | PDF

E24.
Soichi Ibaraki, Atsushi Matsubara, and Yoshiaki Kakino, "A Numerical Optimization Approach to Tune a Fixed-structure Feedback Controller for Damping Control of Feed Drive Systems," Proc. of 2002 JUSFA, vol. 1, pg. 67-70, July 2002.
Abstract | PDF

E23.
Atsushi Matsubara, Soichi Ibaraki, Yoshiaki Kakino, Kangkyu Lee, Yasuhiko Suzuki, Yoshinori Yamaoka, "A Practical Servo Parameter Tuning Method for High Speed Feed Drives of NC Machine Tools," Proc. of 2002 JUSFA, vol. 1, pg. 71-74, July 2002.
Abstract | PDF

E22.
Tomonori Sato, Yoshiaki Kakino, Atsushi Matsubara, Soichi Ibaraki, Hidenori Saraie, "Proposal of the Extended System Framework of Intelligent Machine Tool," Proc. of 2002 JUSFA, vol. 1, pg. 15-20, July 2002.
Abstract | PDF

E21.
Masao Nakagawa, Tetsuya Matsushita, Shigeharu Watanabe, Yoshiaki Kakino, Yukitoshi Ihara, "The Improvement of Motion Accuracy of Hexapod Type Machine Tools and Its Machining Performance" Proc. of 2002 JUSFA, vol. 2, pg. 979-982, July 2002.
Abstract | PDF

E20.
Hirotoshi Otsuka, Iwao Yamaji, Yoshiaki Kakino, Atsushi Matsubara, Tetsufumi Ito, Yukitoshi Ihara, "Advanced Feed Forward Control for Constant Cutting Forces in Die Machining" Proc. of 2002 JUSFA, vol. 1, pg. 445-451, July 2002.
Abstract | PDF

E19.
Yoshiaki Kakino, Atsushi Matsubara, Iwao Yamaji, Hidenori Saraie, Makoto Fujishima, Hirotoshi Ohtsuka, Hideo Nakagawa, "Intelligent Endmilling System and Its Application to Internal Cylindrical Machining with Spiral Curves," Proc. of 2002 JUSFA02, vol. 1, pg. 415-420, July 2002.
Abstract | PDF

E18.
Makoto Fujishima, Soichiro Fukui, Yoshiaki Kakino, Soichi Ibaraki, Iwao Yamaji, Heisaburo Nakagawa, Toshiki Hirogaki, "Suppression of Drill Wear at the Hole Bottom in Intelligent Machine Tools," Proc. of 2002 JUSFA, vol.1, pg.251-256, July 2002.
Abstract | PDF

2001

E17.
S. Ibaraki, S. Suryanarayanan and M. Tomizuka, "H-infinity Optimization of Luenberger State Observers and Its Application to Fault Detection Filter Design," Proc. of the 40th IEEE Conference on Decision and Control, Orlando, FL, Dec. 2001.
Abstract | PDF

E16.
S. Ibaraki, Y. Kakino, K. Lee, Y. Ihara, J. Braasch, and A. Eberherr, "Diagnosis and Compensation of Motion Errors in NC Machine Tools by Arbitrary Shape Contouring Error Measurement," Laser Metrology and Machine Performance V, WIT Press, Southampton, UK, pp. 59-68, 2001 (Proc. of LAMDAMAP 01 at Birmingham, UK, July 2001).
Abstract | PDF

E15.
S. Ibaraki and M. Tomizuka, "Rank Minimization Approach for Solving BMI Problems with Random Search," Proc. of the American Control Conference (ACC), Arlington, Virginia, pp.1870-1875, June 2001.
Abstract | PDF

2000

E14.
Y. Kakino, A.Schramm, H. Ohtsuka, H. Nakagawa and T. Hirogaki, "Intelligent CAM System for Manufacturing of Hardened Steel Made Dies and Molds," Proc. of the 5th Int'l Conf. on Progress of Machining Technology (ICPMT), Beijing, P.R. China, 2000.
Abstract | PDF

E13.
A. Matsubara, Y. Kakino, T. Ogawa, H. Nakagawa and T. Sato, "Monitoring of Cutting Forces in End-milling for Intelligent Machine Tools," Proc. of the 5th Int'l Conf. on Progress of Machining Technology (ICPMT), Beijing, P.R. China, pp. 615, 2000.
Abstract | PDF

E12.
Y. Ihara, T. Ishida, Y. Kakino, Z. Li, T.Matsushita and M. Nakagawa, "Kinematic Calibration of a Hexapod Machine Tool by Using Circular Test," Proc. of Japan US Sympo. on Factory Automation (JUSFA2000), Ann Arbor, Michigan, June 2000.
Abstract | PDF

E11.
A. Matsubara, Y. Kakino and Y. Watanabe, "Servo Performance Enhancement of High Speed Feed Drivers by Damping Control", Proc. of Japan US Sympo. on Factory Automation (JUSFA2000), Ann Arbor, Michigan, June 2000.
Abstract | PDF

E10.
T. Sato, Y. Kakino, A. Matsubara, M. Fujishima and I. Nishiura, "High Speed and High Productive Drilling by Intelligent Machine Tools --Integration of the Cutting Conditions Planning and Adaptive Control for Drilling--", Proc. of Japan US Symposium on Factory Automation (JUSFA2000), Ann Arbor, Michigan, June 2000.
Abstract | PDF

E9.
Y. Kakino, Y. Yamaoka, A. Nagae, Y. Suzuki and T. Muraki, "High Speed, High Productive Tapping by Intelligent Machine Tools", Proc. of 2000 Int'l Conf. on Advanced Manufacturing Systems and Manufacturing Automation (AMSMA2000), Guangzhou, P.R. China, pp. 145-149, June 2000.
Abstract | PDF

E8.
K. Miyaguchi, S. Nakamura, T. Ookubo and Y. Kakino, "A Study on the Accuracy Improvement by Using Temperature Control of Ball Screw with Hollow Shaft," Proc. of 2000 Int'l Conf. on Advanced Manufacturing Systems and Manufacturing Automation (AMSMA2000), Guangzhou, P.R. China, pp.207-210, June 2000.
Abstract

E7.
Y. Kakino, H. Ohtsuka, H. Nakagawa and T. Hirogaki, "NC Programming for Constant Cutting Force in Die Machining," Proc. of 2000 Int'l Conf. on Advanced Manufacturing Systems and Manufacturing Automation (AMSMA2000), Guangzhou, P.R. China, pp.471-475, June 2000.
Abstract

E6.
H. Nakagawa, T. Hirogaki and Y. Kakino, "Honing Process on a Machining Center", Proc. of 2000 Int'l Conf. on Advanced Manufacturing Systems and Manufacturing Automation (AMSMA2000), Guangzhou, P.R. China, pp.113-116, June 2000.
Abstract

E5.
M. Fujishima, I. Nishiura, Y. Kakino and A. Matsubara, "Integration of Adaptive Control Functions for Drilling in Intelligent Machine Tools", Proc. of the 6th International Conference on Automation Technology (AUTO 2000), Taipei, R.O.C. Taiwan, pp.531, May 2000.
Abstract | PDF

1999

E4.
A. Ektesabi, M. Hamdi, S. Hakamata, A. Wennerberg, Y. Kakino, "Fabrication and Characterization of a Precisely Engineered Surface for Biomedical Applications, Proc. of 9th ICPE, pp. 807-812, 1999

E3.
Y. Kakino, Y.Ihara, A. Matsubara, K. Tanaka, T. Akiyama, S. Hayama, "Measurement of Motion Accuracy and Improvement of Machining Accuracy on Ultra-high Precision NC machine Tools by Using Cross Grid Encoder Test," Proc. of 1st International Conference of the European Society for Precision Engineering and Nanotechnology (euspen), Bremen, Germany, Vol. 1, pp135-138, 1999
Abstract

E2.
Y. Kakino, A. Matsubara, H. Nakagawa, T. Hirogaki, Y. Kita, "In-situ Measurement of Grinding Wheel Surface Topography and Its Influence on the Surface Roughness", Proc. of IMEKO-XV World Congress, Osaka, Japan, Vol.IX, pp.151-158, 1999.
Abstract

E1.
Y. Kakino, Y. Ihara, S. Lin, "A Method for Quick Measurement and Diagnosis of the Arbitrary Shape Contouring Errors of NC Machine Tools", Proc. of IMEKO-XV World Congress, Osaka, Japan, Vol.IX, pp.7-14, 1999.
Abstract