Kyoto University Graduate School of Engineering Department of Micro Engineering
Machining Measurement and Control Laboratory

Journal Papers in English

2014

JE44.
Soichi Ibaraki, Yusuke Ota, "Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe, " International Journal of Automation Technology, vol. 8, No. 1, pp. 20-27, 2014.
Abstract | publisher (open access)

2013

JE43.
Daisuke Kono, Takahiro Inagaki, Atsushi Matsubara, Iwao Yamaji, "Stiffness model of machine tool supports using contact stiffness, " Precision Engineering, vol. 37, No. 3, pp. 650-657, 2013.
Winner of 2013 JSPE Young Researcher Award. Abstract | kurenai

JE42.
Atsushi Matsubara, Taku Yamazaki, Shinya Ikenaga, "Non-contact measurement of spindle stiffness by using magnetic loading device, " International Journal of Machine Tools and Manufacture, vol. 71, pp. 20-25, 2013.
Abstract

JE41.
Soichi Ibaraki, Takeyuki Iritani, Tetsuya Matsushita, "Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe, " International Journal of Machine Tools and Manufacture, vol. 68, pp. 21-29, 2013.
Abstract | kurenai

JE40.
Cefu Hong, Soichi Ibaraki, "Non-contact R-test with laser displacement sensors for error calibration of five-axis machine tools, " Precision Engineering, vol. 37, pp. 159-171, 2013.
Abstract | kurenai

2012

JE39.
Soichi Ibaraki, Cefu Hong, "Thermal Test for Error Maps of Rotary Axes by R-Test," Key Engineering Materials, vol.523-524, pp. 809-814, 2012.
Abstract

JE38.
Ryota Sawamura, Shinya Ikenaga, Atsushi Matsubara, "Development of Dynamic Loading Device for Rotating Spindle of Machine Tools," Key Engineering Materials, vol.523-524, pp. 554-549, 2012.
Abstract

JE37.
Daisuke Kono, Takahiro Inagaki, Atsushi Matsubara, Iwao Yamaji, "Measurement of Contact Stiffness for Stiffness Estimation of Machine Tool Supports," Key Engineering Materials, vol.523-524, pp. 457-462, 2012.
Abstract

JE36.
Yoshihiro Kimura, Atsushi Matsubara, Yusuke Koike, "Analysis of Measurement Errors of a Diffuse-Reflection-Type Laser Displacement Sensor for Profile, " International Journal of Automation Technology, vol. 6, No. 6, pp. 724-727, 2012.
Abstract | publisher (open access)

JE35.
Cefu Hong, Soichi Ibaraki, "Graphical presentation of error motions of rotary axes on a five-axis machine tool by static R-test with separating the influence of squareness errors of linear axes, " International Journal of Machine Tools and Manufacture, vol. 59, pp. 24-33, 2012.
Abstract

JE34.
Daisuke Kono, Atsushi Matsubara, Kotaro Nagaoka, Kazuo Yamazaki, "Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools," Precision Engineering, vol. 36, pp. 477-484, 2012.
Abstract | kurenai

JE33.
Soichi Ibaraki, Takeyuki Iritani, Tetsuya Matsushita, "Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe," International Journal of Machine Tools and Manufacture, 58, pp. 44-53, 2012.
Abstract | kurenai

JE32.
Soichi Ibaraki and Wolfgang Knapp, "Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools : A Review," International Journal of Automation TechnologyTechnology, 6(2), pp. 110-124, 2012.
Abstract | publisher (open access)

JE31.
Cefu Hong and Soichi Ibaraki, "Observation of Thermal Influence on Error Motions of Rotary Axes on a Five-Axis Machine Tool by Static R-Test," International Journal of Automation TechnologyTechnology, 6(2), pp. 196-204, 2012.
Abstract | publisher (open access)

JE30.
Daisuke Kono, Sacha Weikert, Atasushi Matsubara, and Kazuo Yamazaki, "Estimation of Dynamic Mechanical Error for Evaluation of Machine Tool Structures," International Journal of Automation TechnologyTechnology, 6(2), pp. 173-153, 2012.
Abstract | publisher (open access)

JE29.
Taku Yamazaki, Atsushi Matsubara, and Shinya Ikenaga, "Measurement of Rigidity Change of Preload Switching Spindle," International Journal of Automation TechnologyTechnology, 6(2), pp. 175-179, 2012.
Abstract | publisher (open access)

JE28.
Tetsuya Matsushita, Hiroshi Ueno, and Atsushi Matsubara, "Elastic Deformation Error Model for Calibration and Compensation of Parallel Kinematic Mechanism Machine Tool," International Journal of Automation TechnologyTechnology, 6(2), pp. 188-195, 2012.
Abstract | publisher (open access)

2011

JE27.
Soichi Ibaraki, Yusuke Tanizawa, "Vision-Based Measurement of Two-Dimensional Positioning Errors of Machine Tools," Journal of Advanced Mechanical Design, Systems, and Manufacturing, 5(4), pp. 315-328, 2011.
Abstract | kurenai

JE26.
Soichi Ibaraki, Kunitaka Takeuchi, Tomoaki Yano, Toshiyuki Takatsuji, Sonko Osawa and Osamu Sato, "Estimation of Three-Dimensional Volumetric Errors of Numerically Controlled Machine Tools by a Tracking Interferometer," Journal of Mechanics Engineering and Automation, 1(4), pp. 313-319, 2011.
Abstract

JE25.
Atsushi Matsubara, Kotaro Nagaoka, Tomoya Fujita, "Model-reference feedforward controller design for high-accuracy contouring control of machine tool axes," CIRP Annals - Manufacturing Technology, 60, pp. 415-418, 2011.
Abstract

JE27.
Tomoya Fujita, Atsushi Matsubara, KazuoYamazaki, "Experimental characterization of disturbance force in a linear drive system with high-precision rolling guideways," International Journal of Machine Tools and Manufacture, 51, pp. 104-111, 2011.
Abstract

JE26.
Soichi Ibaraki, Chiaki Oyama, Hisashi Otsubo, "Construction of an error map of rotary axes on a five-axis machining center by static R-test," International Journal of Machine Tools and Manufacture, 51, pp. 190-200, 2011.
Abstract | kurenai

JE25.
Cefu Hong, Soichi Ibaraki, Atsushi Matsubara, "Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools," Precision Engineering, 35(1), pp. 1-11, 2011.
Winner of JSPE Young Researcher Award.
Winner of 2011 Commendation Program for Research Papers by Mazak Foundation.

Abstract | kurenai

2010

JE24.
Taku Yamazaki, Atsushi Matsubara, Tomoya Fujita, Toshiyuki Muraki, Kohei Asano, Kazuyuki Kawashima, "Measurement of Spindle Rigidity by using a Magnet Loader," Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4(5), pp. 985-994, 2010.
Abstract | J-stage

JE23.
Soichi Ibaraki, Takuya Shimizu, "A Long-term Control Scheme of Cutting Forces to Regulate Tool Life in End Milling Processes," Precision Engineering, 34(4), pp. 675-682, 2010.
Abstract | kurenai

JE22.
Daisuke Kono, Thomas Lorenzer, Sascha Weikert, Konrad Wegener "Evaluation of Modelling Approaches for Machine Tool Design," Precision Engineering, Vol. 34, pp. 399-407, 2010.
Abstract | kurenai

JE21.
Daisuke Kono, Atsushi Matsubara, "Investigation of copying rate of tool motions on workpiece profile," Key Engineering Materials, Vols. 447-448, pp. 121-125, 2010.
Abstract

JE20.
Soichi Ibaraki, Takafumi Hata, "A New Formulation of Laser Step Diagonal Measurement -- Three-dimensional Case--," Precision Engineering, 34(3), pp. 516-525, 2010.
Abstract | kurenai

JE19.
Soichi Ibaraki, Iwao Yamaji, Atsushi Matsubara, "On the removal of critical cutting regions by trochoidal grooving," Precision Engineering, 34(3), pp. 467-473, 2010.
Abstract | kurenai

JE18.
Soichi Ibaraki, Masahiro Sawada, Atsushi Matsubara, Tetsuya Matsushita, "Machining tests to identify kinematic errors on five-axis machine tools," Precision Engineering, 34(3), pp. 387-398, 2010.
Winner of JSPE Numata Memorial Paper Award.
Winner of Machine Tool Engineering Foundation Best Paper Award.
Abstract | kurenai

JE17.
Tomoya Fujita, Atsushi Matsubara, Daisuke Kono, Iwao Yamaji, "Dynamic characteristics and dual control of a ball screw drive with integrated piezoelectric actuator," Precision Engineering, 34(1), pp. 34-42, 2010.
Winner of 2010 Commendation Program for Research Papers by Mazak Foundation.
Abstract | kurenai

2009

JE16.
Kotaro Nagaoka, Atsushi Matsubara, Tomoya Fujita, Tomonori Sato, "Analysis Method of Motion Accuracy Using NC System with Synchronized Measurement of Tool-Tip Position," International Journal of Automation Technology, 3(4), pp. 394-400, 2009.
Abstract | publisher (open access)

JE15.
Taku Yamazaki, Toshiyuki Muraki, Atsushi Matsubara, Mitsuho Aoki, Kenji Iwawaki, Kazuyuki Kawashima, "Development of a High-Performance Spindle for Multitasking Machine Tools," International Journal of Automation Technology, 3(4), pp. 378-384, 2009.
Abstract | publisher (open access)

JE14.
Atsushi Matsubara, Soichi Ibaraki, "Monitoring and Control of Cutting Forces in Machining Processes: A Review," International Journal of Automation Technology, 3(4), pp. 445-456, 2009.
Abstract | publisher (open access)

JE13.
Soichi Ibaraki, Atsushi Matsubara, "On the magnification of two-dimensional contouring errors by using contour-parallel offsets," Precision Engineering, 33(4), pp. 322-326, 2009.
Abstract | kurenai

JE12.
M. Sharif Uddin, Soichi Ibaraki, Atsushi Matsubara, Tetsuya Matsushita, "Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors," Precision Engineering, 33(2), pp. 194-201, 2009.
Abstract | kurenai

JE11.
Soichi Ibaraki, Takafumi Hata, Atsushi Matsubara, "A new formulation of laser step-diagonal measurement -- two-dimensional case," Precision Engineering, 33(1), pp. 56-64, 2009.
Abstract | kurenai

2008

JE10.
Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Tomoya Fujita, "High-precision machining by measurement and compensation of motion error," International Journal of Machine Tools and Manufacture, 48 (10), pp. 1103-1110. 2008.
Abstract | kurenai

JE9.
Soichi Ibaraki, Atsushi Matsubara, Masanori Murozumi, "Efficiency Comparison of Cutting Strategies for End Milling Processes Under Feedrate Scheduling," International Journal of Automation Technology, 2 (5), pp. 377-383, 2008.
Abstract | publisher (open access)

2007

JE8.
M. Sharif Uddin, Soichi Ibaraki, Atsushi Matsubara, Susumu Nishida, Yoshiaki Kakino, "A Tool Path Modification Approach to Cutting Engagement Regulation for the Improvement of Machining Accuracy in 2D Milling with a Straight End Mill", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 129 (6), pp. 1069-1079, 2007.
Abstract

2006

JE7.
Ahmed Aly Diaa Sarhan, Atsushi Matsubara, Motoyuki Sugihara, Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors," JSME International Journal, Series C, Vol. 49, No.2, pp. 307-315, 2006.
Abstract

JE6.
Mohammad Sharif Uddin, Soichi Ibaraki, Atsushi Matsubara, Susumu Nishida, Yoshiaki Kakino, "Constant Engagement Tool Path Generation to Enhance Machining Accuracy in End Milling," JSME International Journal, Series C, Vol. 49, No. 1, pp. 43-49, 2006.
Abstract

2005

JE5.
Soichi Ibaraki, Shashikanth Suryanarayanan, Masayoshi Tomizuka, "Design of Luenberger State Observers using Fixed-structure H-infinity Optimization and Its Application to Fault Detection in Lane-Keeping Control of Automated Vehicles," IEEE/ASME Trans. on Mechatronics, Vol. 10, No. 1, (2005), pp.34-42.
Abstract

2004

JE4.
Yasuhiko Suzuki, Atsushi Matsubara, Yoshiaki Kakino and Kazuhiko Tsutsui, "A Stick Motion Compensation System with a Dynamic Model," JSME International Journal, Series C, Vol. 47, No. 1, pp. 168-174, 2004.
Abstract

JE3.
Atsushi Matsubara, Kangkyu Lee, Soichi Ibaraki, Yoshiaki Kakino, "Enhancement of Feed Drive Dynamics of NC Machine Tools by Actively Controlled Sliding Guideway," JSME International Journal, Series C, Vol. 47, No. 1, pp. 150-159, 2004.
Abstract

JE2.
Soichi Ibaraki, Toshihiro Okuda, Yoshiaki Kakino, Masao Nakagawa, Tetsuya Matsushita, Tomoharu Ando, "Compensation of Gravity-induced Errors on a Hexapod-type Parallel Kinematic Machine Tool," JSME International Journal, Series C, Vol. 47, No. 1, pp. 160-167, 2004.
Abstract

2001

JE1.
T. Hirogaki, H. Nakagawa, M. Hayamizu, Y. Kita and Y. Kakino, "In-situ Heat Treatment System for Die Steels Using YAG Laser with a Machining Center", Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Vol. 25, No. 3, pp. 212-217, 2001.
Abstract

1996

JE17.
Yoshiaki Kakino, Atsushi Matsubara, "High Speed and High Acceleration Feed Drive System for NC Machine Tools," International Journal of the Japan Society for Precision Engineering, Vol. 30, No. 4, pp. 295-298, 1996.