Kyoto University Graduate School of Engineering Department of Micro Engineering
Machining Measurement and Control Laboratory

Miscellaneous Publications

2014

M33. Technical Article
Soichi Ibaraki, "R-test analysis software for measurement and comensation for motion errors of five-axis machine tools," Kikai Gijutsu, Apr. 2014.

2013

M32. Technical Article
Soichi Ibaraki, "Measurement and compensation of machine tool volumetric errors," Kikai no Kenkyu, Yokendo, Oct. 2013.

M31. Technical Article
Soichi Ibaraki, "Comensation for machine tool volumetric errors and new ISO standards," Nikkan Kogyo Shinbun May 28, 2013, May 2013.

M30. Technical Article
Atsushi Matsubara, "Accuracy tests and compensation for machine tools (Special issue: latest technologies in JIMTOF 2012)," Kikai to Kougu, Jan. 2013.

M29. Keynote Speech
Soichi Ibaraki, "Machining tests for five-axis machine tools and thermal influence," Keynote speech, 2013 Spring JSPE Semiannual Meeting, Mar. 2013.

M28. Technical Article
Soichi Ibaraki, "Volumetric accuracy measurement for NC machine tools," Journal of the Society of Instrument and Control Engineers, vol.52, no.1, 2012.

2012

M27. Technical Article
Atsushi Matsubara, "Vibration analysis for high-precision machine tools," Journal of the Japan Society for Precision Engineering, vol. 78, no. 11,2012.

M26. Technical Article
Soichi Ibaraki, "Machining center: Trends in international standards on machine tool volumetric accuracy evaluation and compensation," Nikkan Kogyo Shinbun Nov. 1. 2012.

M25. Technical Article
Soichi Ibaraki, "Measurement and compensation of motion errors of five-axis machine tools," Journal of the Japan Society for Precision Engineering, vol. 78, no. 9, pp. 763-766, 2012.

M25. Technical Article
Soichi Ibaraki, "On-machine measurement schemes to ensure machine tool's motion accuracy," Kikai Gijutsu, vol. 67, no. 7, pp. 34-37, 2012.

2011

M24. Technical Article
Atsushi Matsubara, "Measurement and Control of Machine Tool Motion," Transactions of the Japan Society of Mechanical Engineers Series C, vol. 77, no. 749, pp. 2814-2851, 2011.

M23. Technical Article
Soichi Ibaraki, New technologies for measurement and compensation of volumetric errors of machine tools, Nikkan Kogyo Shinbun Sep. 28. 2011 (technical article), Nikkan Kogyo Shinbun, Sep. 2011.

M22. Technical Article
Soichi Ibaraki, New instruments and ISO standards for volumetric accuracy measurement of machine tools (Topics), Journal of the Japan Society of Mechanical Engineeres, vol. 114, no. 1112, p. 542, 2011.

2010

M21. Technical Article
Soichi Ibaraki, Ball bar measurements for error diagnosis of 5-axis machine tools, Nikkan Kogyo Shinbun Oct. 28. 2010 (technical article), Nikkan Kogyo Shinbun, Oct. 2010.

M20. Technical Article
Soichi Ibaraki, 16.6 Machine tools, Journal of the Japan Society of Mechanical Engineers, Vol. 113, No. 1101, Aug. 2010.

M19. Non-technical Article
"Machining, Measurement, and Control Laboratory, Dept. of Micro Engineering, Kyoto Unversity," Journal of the Japan Society for Precision Engineering, Vol. 76, No. 4, Apr. 2010.

M18. Technical Article
Atsushi Matsubara, "Monitoring of cutting process and its application," Journal of the Japan Society for Abrasive Technology, Vol. 54, No. 3, pp. 127-130, 2010

2009

M17. Keynote Presentation
A. Matsubara, ``Research and Development on Intelligent Control of Machine Tools,'' Proc. of 9th International Conference on Production Engineering, Design, and Control, pp. 10-12, 2009.

2008

M16. Technical Article
Sekigahara Seisakusho LTD.(Gravure & Interview) , Journal of the Japan Society of Precision Engineering, 74 (9), pp. 893-896, 2008.

B2. Book
Atsushi Matsubara: Design and Control of Precision Positioning and Feed Drive Systems, Morikita Publishing Co., Ltd., 2008.
Publisher's site

B1. Book
Encyclopedia of high-accuracy positioning technologies, Sangyo Gijutsu Service Center, (Ibaraki: one of co-editors and an author of Section 7.2.2), 2008.
Publisher's site

M15. Technical Article
Soichi Ibaraki, Machining Process Control to Extend Tool Life, Nikkan Kogyo Shinbun, Oct. 3. 2008, Nikkan Kogyo Shinbun, Oct. 2008.

M14. Technical Article
Soichi Ibaraki, Measurement of Motion Accuracies on Five-axis Machine Tools, Nikkan Kogyo Shinbun, August 22. 2008, Nikkan Kogyo Shinbun, August 2008.

2007

M13. Technical Article
Soichi Ibaraki: Servo Control and Error Compensation in a Feed Drive of a Machine Tool, Tool Engineer, Taiga Publications, 48(12), pp. 70-73, Oct. 2007.

2006

M12. Technical Article
Atsushi Matsubara: Machine Tools, Journal of the Japan Society of Mechanical Engineers, 109(1053), pp. 670, 2006.

2005

M11. Technical Article
Atsushi Matsubara: High-precision Positioning Technology in Machine Tools, Kikai no Kenkyu, 57(12), pp.1207-1212, Dec. 2005.

M10. Technical Article
Atsushi Matsubara: Recent Research and Development in Linear Motor Drives, Kikai Gijutsu, 53(5), 681, pp. 18-22, May 2005.

2004

M9. Technical Article
Atsushi Matsubara: Ultra-precision Positioning Technology in Machine Tools, Nikkan Kogyo Shinbun, November 11, 2004.

2003

M8. Technical Article
Atsushi Matsubara: High-precision Positioning and Related Technologies, Nikkan Kogyo Shinbun, August 21, 2003.

2002

M18. Technical Article
Atsushi Matsubara: Current Status and Trends of Monitoring and Control Technology in Machining Process, J. of the Society of Instrument and Control Engineers, Vol. 41, No. 11, pp. 781-786, 2002.
PDF

2000

M6. Keynote Presentation
Y. Kakino, "Trend of Car Manufacturing Systems in Japan," Proc. of the 5th International Conference on Progress of Machining Technology (ICPMT), Beijing, P.R. China, pp.958, 2000.

M5. Keynote Presentation
Y. Kakino, "New Trend of Production in Japanese Car Industries," Proc. of Japan-USA Symposium on Factory Automation (JUSFA2000), Ann Arbor, Michigan, June 2000.

1999

M3. Keynote Presentation
Y. Kakino, "High Speed and Productive Drilling by Intelligent Machine Tools," Proc. of 3rd Int'l Conf. on Laser Metrology and Machine Performance (LAMDAMAP 99), Newcastle, UK, July 1999.

M2. Technical Article
Y. Kakino, "Technical Trends in Latest FA Controllers", Journal of the Japan Society for Precision Engineering, Vol.65, No.9, pp.1241-1244, 1999

M1. Technical Article
Y. Kakino, "New Trends in Machining Technology and Machine Tools", Kikai to Kougu, Vol.43, No.4, pp.2-4, 1999